Powered low-frequency extension system with 2 x subwoofer towers and 2 x 900W amplifier
Modern music is increasingly bass-intensive. To pack the maximum amount of energy into the lowest octave - with no surprises in the playback - a sound engineer needs to hear and feel throughout the whole frequency spectrum.
BaseTwo25 low-frequency extension system fits equally well in any composing, mixing, or mastering setup, where correct reproduction and appreciation of the lowest octave is critical. Amphion’s innovative approach to low-frequency monitoring provides producers, sound engineers and artists with a completely new perspective to the base.
The BaseTwo25 is a state-of-the-art monitoring solution converting any Amphion two-way studio monitor into a full-range, time and phase coherent, three-way system. These full-range towers extend all the way down to 20Hz. Each BaseTwo25 has 2 x 25 cm woofers (top) and matching 2 x 25 cm radiators (below) mounted in back to back force-cancelling mode on both sides of the cabinet. The system is driven by 2 x 900W amplifier, and controlled by Amphion’s signature filtering module with a variable-level attenuator.
In addition to providing tight, tuneful bass, BaseTwo25 improves midrange clarity and increases the midrange power-handling abilities of the paired monitors. This is achieved by gradually transferring the low-end frequencies from the monitors to the base extenders.
Operating principle - One-way, passive radiator
Woofer - 2 x 25 cm / 10” aluminium
Passive radiator - 2 x 25 cm / 10” aluminium
Crossover point - 100 Hz
Frequency response - 20 - 100 Hz +/-3dB
Measurements (H x W x D) - 956 x 191 x 386 mm
Weight - 70 kg / 154 lbs.
Amp1000 Technical specifications:
Output power - 2x900W RMS into 4 Ω @ 1% THD
Frequency response - 10Hz - 65kHz (-3dB)
Distortion - @ 1W: 0,003% (100 Hz)
Distortion - @100W: 0,006% (100 Hz)
Signal to noise ratio - 93dB @ 1W
!!! $12,500. Price is for complete BassTwo25 system. This includes the Amp1000 amplifier and crossover module !!!